Jeep Compass Owner's Manual page 185

NOTE: Magnetic and battery powered devices, (such as
cell phones, iPod's, radar detectors, PDA's and laptops)
should be kept away from the top of the instrument
panel. This is where the compass module is located and
such devices may interfere and cause false compass
readings.
UNDERSTANDING YOUR INSTRUMENT PANEL 183
To Set the Variance With the ignition in the ON position,
quickly (less than one second) press and release the EVIC
button several times until you have displayed the Per-
sonal Settings (Customer-Programmable Features) menu.
Once in the Personal Settings (Customer-Programmable
Features) menu, press and release (less than one second)
the EVIC button several times until "Compass Variance"
is highlighted. The "Compass Variance" message and the
current variance zone number will be displayed. To
change the zone, press and hold (longer than two sec-
onds) the EVIC button to increment the variance one
step. Repeat as necessary, with individual long (for at
least 1 second) EVIC button presses for each increment,
until the desired variance is achieved. To exit the Vari-
ance Programming, press the EVIC button with a short
(less than one second) button press.
NOTE: The factory default is Zone 8. During program-
ming, the zone value will wrap around from Zone 15 to
Zone 1.
4