Jeep Compass Owner's Manual page 186

184 UNDERSTANDING YOUR INSTRUMENT PANEL
Compass Calibration
If the compass appears erratic or inaccurate, and the
variance has been properly set, you may wish to manu-
ally recalibrate the compass. To manually calibrate the
compass:
1. Start the engine and leave the transmission in the
PARK position.
2. Press and release the EVIC button (less than one
second) several times until the EVIC displays the "Per-
sonal Settings (Customer-Programmable Features)"
menu.
3. Once in the "Personal
Programmable Features)" menu, press and release the
EVIC button (less than one second) several times until
"Calibrate Compass (Yes)" is displayed.
Settings (Customer-
4. Press the EVIC button (more than one second), this
will place the Compass in calibration mode. The CAL
indicator will come on continuously in the EVIC display
to indicate that the compass is now in the calibration
mode, and that the vehicle can now be driven to calibrate.
5. Press the EVIC button (less than one second) from the
Calibrate Compass (Yes) screen will exit the EVIC
Customer-Programmable Features, and return it to its
normal operating mode.
6. To complete the compass calibration, drive the vehicle
in one or more complete 360–degree circle under 5 mph
(8 km/h) in an area free from power lines and large
metallic objects, until the "CAL" indicator turns off. The
compass will now function normally.