Transferring Data To Pc - Hitachi DZMV100E Instruction Manual

Transferring Data to PC

There are several ways to transfer the data recorded on this DVD camera/recorder to PC.
When using the PC connection software
Using the PC connection software, you can utilize stills recorded on this DVD cam-
era/recorder, on Windows 98 PC (note 1).
Utilizing recorded stills:
This DVD camera/recorder records two types of still on disc: stills (MPEG2 704 x
576 pixels) to be viewed on TV and stills (JPEG 1,280 x 960 pixels) to be used on
PC. You can use the PC connection software to transfer PC stills to PC.
Note 1: There are numerous types of PC, including those assembled by individual
persons. For information on whether the PC connection software can be used with
your PC, refer to "Conditions in which PC connection software can be used" on the
next page.
Cautions:
• Only IBM PC/AT compatible PCs with Windows 98 installed can be used
with the PC connection software. Read following "Conditions in which PC
connection software can be used" carefully.
PCs with DVD-RAM drive, DVD-ROM drive
If PCs are provided with DVD-RAM/ROM drive that conforms to 4.7 GB DVD-RAM
disc and 8-cm disc and with the UDF2.01 compatible file system preinstalled, the
data recorded on this DVD camera/recorder can be read on such PCs, by inserting
the disc removed from cartridge into the drive.
Utilizing recorded stills:
Stills are stored on disc as JPEG images (1,280 x 960 pixels): Play them using an
application that is compatible with JPEG image.
140