Hitachi DZMV100E Instruction Manual page 139

Tip:
• The infrared remote control is useful when operating the DVD camera/
recorder while viewing an image on TV screen. However, if you use a
Hitachi VCR, the remote control may inadvertently operate the VCR if it is
near the DVD camera/recorder. To prevent this, set the remote control code
of the VCR to a position other than "VCR2".
Switching On-Screen Information Off
You can switch off the on-screen information that is displayed in the viewfinder or
on the LCD screen, from TV screen.
You can also use the EXT. DISPLAY button on the remote control to switch the set-
ting.
1. Press the MENU button in the recording pause status to display
the menu screen.
2. Use the Select dial to choose "OTHER
SETUP" and then "E. DISPLAY".
Options will be next to "E. DISPLAY": "LINE ON"
is being highlighted.
3. Turn the Select dial to change the option to
"LINE OFF", and then press the Select dial.
The menu screen for setting others will be re-
stored, and "E. DISPLAY" has been specified as
"LINE OFF".
4. Press the MENU button to switch off the menu screen.
If no on-screen information appears on the TV, check the viewfinder or LCD screen.
Caution:
• The on-screen information during playback will also appear even if "E.
DISPLAY" is specified "LINE OFF".
Viewing on TV Screen
139