Hitachi DZMV100E Instruction Manual page 149

Symptom
Power Battery cannot be
supplies charged.
The CHG. or
CHG.80 indicator
on AC adapter/
charger blinks
during charging.
The POWER
indicator on AC
adapter/charger
blinks during
charging.
During Pressing the REC
recording button will not
start recording.
Recording starts
but stops immedi-
ately.
Check to see
Is DC power cable Disconnect it.
plugged into the
AC adapter/
charger?
Is the battery Remove the
attached cor- battery once,
rectly? make sure of the
orientation, and
then reattach it.
Is the battery Remove the
abnormally hot? battery, leave it for
a while to cool
down, then
charge it.
Is the ambient Charge the
temperature too battery at 10-
low or too high? 30°C.
Has the battery Remove the
been unused for a battery, and then
long time? reattach it. If the
battery is still not
charged, it may
be dead: Pur-
chase a new one.
Is the RECORD- If it is set to still,
ING MODE switch recording is not
set to "still"? possible by
pressing REC. Set
the switch to the
movie mode.
Is disc scratched Clean the disc. If
or does dirt or there is still no
fingerprint adhere improvement,
to it? replace the disc.
Troubleshooting
Reference
Correction
page
38
41
64
36
149