Protecting Disc From Writing (Protect Disc); Verifying Remaining Free Space On Disc Or Card (Capacity) - Hitachi DZ-MV730E Instruction Manual

PROTECTING DISC FROM WRITING (PROTECT DISC)

You can protect a DVD-RAM disc in order to prevent recorded images from being erased or edited
by mistake. Further recording will not be possible on protected disc until the protection is released.
1
Press the DISC NAVIGATION button.
2
Press the MENU button.
3
Use "Operating Menu"
(p. 67) to choose
"Protect Disc" on the
"Disc" menu screen,
and then press the A
button.
4
The screen for
verifying protection
will appear:
Choose "YES", and
then press the A
button.

VERIFYING REMAINING FREE SPACE ON DISC OR CARD (CAPACITY)

You can find out how long you will be able to record on one side of disc or on card.
1
Press the DISC NAVIGATION button.
2
Press the MENU button.
3
Use "Operating Menu" (p. 67) to choose
"Capacity" on the "Disc" or "Card" menu
screen, and then press the A button.
(When using disc)
Cap a c i t y
A p p r o x .
V I DEO( XTRA) : 17m i n
*1
V I DEO( F I NE) : 26m i n
V I DEO( STD) : 54m i n
*2
PHOTO : 996
Cap a c i t y : 9 0%
RETURN
*1 With DVD-R disc: The quality mode first used for
recording with disc will appear.
*2 With DVD-R disc: This will not be displayed.
130
D i s c
Fo rma t D i s c
P r o t e c t D i sc
Ca pac i t y
Upd a t e Con t r o l I n f o .
ETC
ENTER RETURN RAM
P r o t e c t D i s c
W r i t e p r o t e c t d i s c ?
YES NO
ENTER
(When using card)
Cap a c i t y
A p p r o x .
PHOTO( FINE) : 4 6 2
PHOTO( NORM) : 9 2 4
PHOTO( ECO) : 1 8 4 8
Cap a c i t y : 9 6%
RETURN
Choose "NO" to
cancel protection.
After "YES" or "NO"
setting, the Disc
Navigation screen will
be restored.
:
Note
• To release disc protection, perform the same
procedure as above: The screen for verifying the
release of protection will appear.
Choose "YES" to release the protection.
• If disc protection has been engaged on another
device, it may not be releasable on this DVD video
camera/recorder: Use the original device that
protected the disc to release the protection.
4
Press the C button to quit.
The Disc Navigation screen will be restored.
:
Note
With a write-protected disc (see "Terminology", p. 152)
or locked card, the remaining space will always be
displayed as "0".
1
A l l Pr og r ams 0 01 / 019
PLAY RAM
Disc protect icon
123