Hitachi DZ-MV730E Instruction Manual page 159

Message
Card full.
Card full.
Cannot execute.
Card is not formatted.
Format the card now?
CHECK DISC
Control Information
Error.
DISC ACCESS
DISC ALMOST FULL
Disc error has occurred.
Finalizing is not
complete.
Disc error has occurred.
Format the disc now?
Disc error has occurred.
Formatting is not
complete.
Disc error has occurred.
Keep disc inside &
restart.
Cause & Troubleshooting
Delete unnecessary stills and try the card, or use another card.
No more recording on this card can be done: Delete unnecessary
stills or use another card.
Delete unnecessary stills and try the card, or use another card.
Was the card formatted on PC? When using the card on this DVD
video camera/recorder, choose "YES" and format it.
A disc unusable on this DVD video camera/recorder may have
been inserted or the disc may be damaged.
Make sure that the type of disc is correct, and make sure that the
disc is not write-protected.
Mismatch may occur between the recorded image and scene
information.
Update the control information.
• Use another disc.
• See *3 on page 163.
The recorded scene is being stored on disc.
Wait until the message disappears, and you can start to use the
DVD video camera/recorder.
This DVD video camera/recorder is verifying whether the correct
disc has been inserted.
Wait until the message disappears, and you can start to use the
DVD video camera/recorder.
Remaining free space on disc is less than 1 minute of video or 10
photos: Delete unnecessary scenes or use another disc.
• Disc error occurred during finalising, and finalising failed.
Replace the disc.
• See *3 on page 163.
• Has the disc been initialised on PC? Has initialising the disc on
PC been interrupted?
Choose "YES" and initialise the disc when using it on this DVD
video camera/recorder. Initialising the disc will erase all data on
it.
• See *2 on page 163.
The disc may be dirty.
Remove the disc and wipe off fingerprints, dust, etc. before
reusing it, or use another disc.
This message may also appear if you insert a disc for which
formatting was interrupted midway. In this case, use another disc.
Disc error could have occurred during editing of scenes.
Turn off the DVD video camera/recorder with the disc being used
in it, connect AC adapter/charger, and then power the DVD video
camera/recorder again. Repair of scenes will be tried.
Reference
page
32, 107
32, 107
129
28, 130
131
27, 29
52, 54
155
31, 107
132
129
29, 129
46
159