Hitachi DZ-MV730E Instruction Manual page 162

Message
There was no scene
which can be deleted.
This card cannot be
used.
Please replace card.
This disc cannot be
used. Please replace
disc.
This disc is recorded by
the NTSC system.
Please replace disc.
Top scene cannot be
divided.
UNFORMAT DISC
Use AC adapter/
charger.
Use AC adapter/
charger.
Turn off power.
VIDEO scene cannot be
copied to card.
Write protected.
Check card.
Write protected.
Check disc.
162
Cause & Troubleshooting
This message will appear if you try to delete multiple scenes on
Disc Navigation when all the selected scenes have been locked.
Release the lock on scenes before executing deletion.
The card cannot be used in this DVD video camera/recorder: Use
another card.
A disc that cannot be used on this DVD video camera/recorder
has been loaded. Check the type of disc.
This DVD video camera/recorder can use only discs recorded on
the PAL system. A disc recorded on the NTSC system cannot be
used on this DVD video camera/recorder.
Division is not possible at the start of scene.
The disc is not initialised or it is damaged.
If this message appears, be sure to initialise the disc on this DVD
video camera/recorder before using it.
Reinitialising even a disc used on this DVD video camera/
recorder may be necessary (initialising will erase all recorded
contents on disc). If this message appears, try to initialise the
disc. If the same message still appears, the disc may be
damaged: Use another disc.
See *2 on page 163.
Finalisation is not possible when the DVD video camera/recorder
is powered by a battery: Use the AC adapter/charger for
finalisation.
Scene cannot be repaired when the DVD video camera/recorder
is powered by a battery.
If the AC adapter/charger is unavailable in handy place, remove
the disc, use the opposite side, or use another disc. To repair the
removed disc, insert the disc into the DVD video camera/recorder
afterwards, and connect the AC adapter/charger.
No movie can be copied to card.
Select stills and copy them to card.
A card with the erase prevention locked is inserted: Unlock the
switch.
• A write-protected disc is inserted.
• Release the write-protect using the Disc Navigation menu.
Reference
page
107, 115
30
28

109
129
29
46, 132
46
114
30
130