Jumping To Specified Point (Go To) - Hitachi DZMV380E Instruction Manual

JUMPING TO SPECIFIED POINT (GO TO)

1
Press the MENU button
during playback.
2
Choose the option (point
you want to go to), and
Ã
then press the button.
Specifying the point to view
1
Choose "Specify" in step 2 above, and then press
Ã
the button.
The screen for specifying the point to go to will
appear.
Position of currently
played back image
Go T o
TOP
0 : 00 : 00
Cursor
GO TO
TOP END
Cursor position
2
Use the joystick to select the desired time of
chosen point.

: To select the start.
É
: To select the end.
ÈÇ
: ·Press once:
·Hold down: To move the cursor in 1-
Go To
TOP
0 : 00 : 00
GO TO
TOP END
(When the start of scene is selected)
Cursor at current image position.
Cursor at (GO TO) position.
Go T o
To p
En d
S p e c i f y
ENTER RETURN
Total recording time of
all selected scenes
CURRENT END
0 : 03: 26 0 : 24 : 24
0 : 03: 26
ENTER CANCEL
To move the cursor in 10-
second units (1-still units
for card)
minute units (10-still units
for card)
CURRENT END
0 : 03: 26 0 : 24 : 24
0 : 00 : 00
CANCEL
ENTER
Top : To go to the start, and enter playback
pause.
End : To go to the end of last scene, and enter
playback pause.
Specify : To go to a specified point and enter
RAM
playback pause. See the following for
details.
Ã
3
Press the
The DVD video camera/recorder will go to the
specified point and enter the playback pause
status.
To cancel the "Go To" procedure midway, press the
Ä
button before going to the specified point.
:
Note
•
If multiple scenes are selected using the Disc Navigation
function or SELECT button, choosing "Top" will jump to
the beginning of selected scenes (P. 123).
•
When multiple scenes are selected, the total time of
selected scenes will appear in the "total recording time"
display.
•
When card is loaded, the number of stills will appear.
•
The cursor may not move at same-pitch intervals.
button to enter the selection.
69