Table of Contents
Advertisement
4.1.10 Alarm
In this menu, the alarm reactions for input contacts are defined.
RELAY
INPUT1...3
OUTPUT
RETURN
4.1.11 Initialize
POWER ON RESET
CAMERA DEFAULT
FACTORY DEFAULT
LENS REFRESH x DAYS
CAMERA REFRESH x DAYS
OFF/ON
It is possible to switch the output relay remotely with
this menu item for test purpose:
ON:
OFF:
PRESET x
Assignment of the preset position which is linked to
alarm input.
Select preset position 1~32.
OFF/ON
ON: the camera will go to preset [assigned preset
OFF: no reaction in case of active alarm input
Return to main menu.
ON: performs a PTZ initialization similar to power on
OFF: returns to INITIALIZE menu
ON: reset of the camera module to factory settings
OFF: returns to INITIALIZE menu
ON: reset of the pan/tilt electronics module to factory
OFF: returns to INITIALIZE menu
OFF,
Frequent initialization of zoom lens for better stability
1...15
and preset precision.
OFF: no frequent initialization
1...15: interval in days for initialization
OFF,
Frequent initialization of pan/tilt mechanism for better
1...15
stability and preset precision.
OFF: no frequent initialization
1...15: interval in days for initialization
output relay switched
output relay not active (off)
position in lines above] in case of alarm.
In case of alarm, the camera moves to the
defined preset and stays there until manual
PTZ control or any programmed AUTO
RESUME function is carried out
settings
37
EPTZ100_ma_en_rev03.doc
Advertisement
Table of Contents
