Searching For Point You Wish To View By Specifying It (Go To) - Hitachi DZMV200E Instruction Manual

Searching for Point You Wish to View by Specifying It (Go To)

You can specify any point that you want to view in order to search for it.
1
Press the MENU button
during playback or
playback pause.
The "Go To" menu
screen will appear.
2
Use the joystick to choose the option (point you
want to go to), and then press the
Top : To go to the start of first scene on disc
(scene 1), and enter playback pause.
End : To go to the end of last scene on disc,
and enter playback pause.
Specify : To go to a specified point and enter
playback pause. See the following for
details.
46
● Specifying the point to view
1
Choose "Specify" in step 2 above, and then press
the
The screen for specifying the point to go to will
appear.
Time to the midway
point of this scene
button.
Cursor
2
Use the joystick to select the desired time of cho-
sen point.
: To select the start of first scene on disc.
: To select the end of last scene on disc.
: To move the cursor toward the end of
last scene on disc in one-minute units.
: To move the cursor toward the start of
first scene on disc in units of a minute.
(When the start of scene is selected)
3
Press the
The DVD video camera/recorder will go to the
specified point and enter the playback pause
status.
To cancel the "Go To" procedure midway, press the
button before going to the specified point.
Note: The cursor may not move at same-pitch in-
tervals.
button.
Recording time
of this scene
Cursor position
button to enter the selection.