Hitachi DZMV200E Instruction Manual page 100

Message
CHECK DISC
UNFORMAT DISC
END OF DISC
DISC ALMOST FULL
DISC ACCESS
NO DISC
CANNOT RECORD
PHOTOS
100
Cause & Troubleshooting
Disc that cannot be used on this DVD video camera/
recorder has been inserted or disc is damaged.
Check whether the type of disc is correct or not, or
whether the disc is write protected or not.
The disc is not initialized or it is damaged.
If this message appears, be sure to initialize the disc on
this DVD video camera/recorder before using it.
Reinitializing even a disc used on this DVD video cam-
era/recorder may be necessary (initializing will erase
all recorded contents on disc). If this message appears,
try to initialize the disc. If the same message still ap-
pears, the disc may be damaged: Use another disc.
The disc is full.
You cannot record on this disc anymore. Prepare another
disc or delete unnecessary movie scenes from this disc.
The disc will soon be full, and recording will be impossi-
ble.
Replace the disc.
The recorded scene is being stored on disc.
Wait until the message disappears, and you can start
to use the DVD video camera/recorder.
This DVD video camera/recorder is verifying whether
the correct disc has been inserted.
Wait until the message disappears, and you can start
to use the DVD video camera/recorder.
This message will be displayed for a little longer when
the date changes.
The disc has not been inserted.
Insert it.
This message may appear when the DVD video cam-
era/recorder or disc is moved from a cold place to a
warm place.
Condensation has occurred on the camera/recorder
lens or DVD-RAM drive. Do not remove the disc; leave
the DVD video camera/recorder turned off in a place
as dry as possible for 1-2 hours.
Are you using DVD-R disc? You cannot record still im-
age on DVD-R disc (recordable of still images from PC).
Use DVD-RAM disc to record still images.
Reference
page
23
86
37, 79
37
42, 43
—
37
20
26