Cautions When Using DVD Video Camera/
Recorder by Connecting It to PC
:
Note
®
•
Do not use Windows
application to finalize a DVD-R
disc recorded on this DVD video camera/recorder: The
disc will not be recognizable on the DVD video camera/
recorder.
•
When formatting a DVD-RAM disc on Windows
the UDF2.01 format (2.0 if 2.01 cannot be selected) (see
"Terminology" on page 158). Formatting with other
standards could cause the DVD video camera/recorder
to malfunction.
•
Before processing or editing photos, be sure to copy the
JPEG files in 100HPNX1 folder to the hard disk of PC.
•
Ordinary data on PC can usually be written to DVD-RAM
disc in this DVD video camera/recorder, but Hitachi does
not guaranteed the operation.
•
If the PC is started from suspend (see "Terminology" on
page 158) (or sleep or standby) with this DVD video
camera/recorder connected to the PC, the DVD video
camera/recorder may not be recognized: Disconnect
the DVD video camera/recorder from PC once, and
restart the PC.
•
Multiple DVD video camera/recorders cannot be
simultaneously connected to PC.
•
Use a reference of approx. 30 minutes at approx. 30°C
or less for operation when connecting this DVD video
camera/recorder to PC.
- Use a reference of a continuous 30 minutes or less for
write operation when using the DVD-MovieAlbum
copy tool provided with DVD-MovieAlbumSE.
- If the temperature of this DVD video camera/recorder
is too high, writing or reading on this DVD video
camera/recorder may be faulty. And in particular, note
that, if an error occurs during writing to DVD-R disc, the
disc will not be usable. Take care that the temperature
of this DVD video camera/recorder is not too high.
154
®
, use