Table of Contents
Advertisement
Message
"DISC ERROR"
appears when an
attempt to release write-
protect is made.
Disc full. Cannot
execute.
Disc has no data.
Disc has no PlayList.
Disc includes protected
scenes. Delete scenes?
Disc is full. Cannot add
control info.
Disc is not formatted.
Format the disc now?
DPOF is not set to a
scene.
DPOF scenes over limit.
Cannot set DPOF
scenes.
Drive overheat. Please
retry later.
DVD-R Disc, Video
mode cannot be
changed.
END OF DISC
End scene cannot be
divided.
Error occurred. Please
replace disc or format
disc.
150
Cause & Troubleshooting
If you have write-protected a disc using the write-protect setting tool
(WPTOOL) that is equipped with the UDF driver contained on the
CD-ROM provided with this DVD video camera/recorder, you
cannot release the write-protect on this DVD video camera/
recorder as is. Use the write-protect setting tool on PC to release the
write-protect.
Delete unnecessary scenes before using this disc, or use another
disc.
This message will appear when the
disc inserted on which no still is recorded (It will appear if you
attempt playback or editing on Disc Navigation, but will not appear
if you press
on camera through image.).
Switching of play list was selected with no play list stored.
The disc may be software protected from a device other than this
DVD video camera/recorder. To release this case, use a device that
has executed software-protect.
The number of entered scenes has reached the limit that can be
entered, so the control information for generating thumbnails
cannot be added.
Combine several scenes or delete them.
•
Has the disc been initialised on a PC?
Choose "YES" and initialise the disc when using it on this DVD
video camera/recorder. Initialisation will delete all data on the
disc.
•
See *2 on page 153.
This message will appear when "Slide Show: DPOF" is specified for
the card to which DPOF was not set.
The maximum number of scenes for which DPOF can be set is 999.
The temperature inside the DVD video camera/recorder is too high,
and reading or writing of the data on disc may not be performed
normally.
Turn the DVD video camera/recorder off and wait for a while. The
temperature will be effectively decreased if the DVD video camera/
recorder is placed in a well-ventilated spot.
With DVD-R disc, the movie quality mode once used for recording
cannot be changed.
The disc is full.
You cannot record on this disc anymore. Prepare another disc or
delete unnecessary movie scenes from this disc.
Division is not possible at the end of scene.
•
Abnormality has occurred with the DVD-RAM disc to be repaired.
initialise the disc before using it, or use the another disc.
initialising the disc will erase all data on it.
•
See *2 on page 153.
button is pressed with a
Reference
page
99
116
99, 105
125
129
109
46
27
27
106
125
Advertisement
Table of Contents
