Setting Date And Time - Hitachi DZMV350EUK Instruction Manual

Setting Date and Time

Set the current date and time so that the date and time you make a recording can be recorded correctly.
The following procedure can also be used to correct the date and time you have already set.
1
Turn the DVD video camera/recorder on.
2
Press the MENU button.
The menu screen will
appear.
3
Use the joystick to choose
"Date Setup" and then
"Date Set".
4
Tilt the joystick to right.
The figure for the day will
be selected.
[The digit that is
highlighted first depends
on the date display format
(set up in Date Mode): The digit on the left end
of the date display will be first highlighted.]
:
Note
After setting the figure for the day, tilt the joystick to right
to select the digit to be set. If you press the
after selecting the figure for the day, the screen for
verifying the set date will appear instead of screen for
setting month, year or time.
Came r a F u nc t i on s Se t u p
P r o g r am AE : Spo r t s
Wh i t e Ba l . : A u t o
E I S : On
D i g . Zo om : 4 0 x
M IC . F i l t e r : O f f
1 6 : 9 : O f f
ENTER RETURN RAM
Da t e Se t u p
Da t e Mode
Da t e Se t 1 / 1 / 2003
0 : 00
ENTER RETURN RAM
Da t e Se t u p
Da t e Mode
Da t e Se t 1 / 1 / 2003
0 : 00
ENTER RETURN RAM
button
Tilt up/down and to left/right
to select, and then press
to designate.
5
Tilt the joystick to left or
right to select the digit
you want to set in
sequence.
Tilt the joystick up or
down to select the
number for current date/time, and then repeat
step 5 to set the current date and time.
:
Note
To stop date/time setting midway, press the
6
After setting the current
date and time, press the
button.
The screen for verifying
the set date will appear.
7
If the displayed date and time are correct, use the
joystick to choose "YES", and then press the
button.
The date and time will be set, and the DVD video
camera/recorder will enter the recording pause
status.
Choosing "NO" will restore the menu screen.
:
Note
This DVD video camera/recorder incorporates a
rechargeable battery to store the date and time in memory.
If this built-in battery is exhausted, the date and time will be
reset. To prevent this, connect the AC adapter/charger to
DVD video camera/recorder every 3 months, and leave
them for at least 24 hours with the DVD video camera/
recorder turned off: The built-in battery will be charged.
Da t e Se t u p
Da t e Mode
Da t e Se t 3 0 / 9 / 2003
1 7 : 00
ENTER RETURN RAM
button.
Da t e Se t
3 0 / 9 / 2003 1 7 : 0 0
Da t e s e t u p?
YES NO
ENTER RAM
49