Functions And Features - Hitachi AXM10E Instruction Manual

FUNCTIONS AND FEATURES

GENERAL SECTION
SWITCHING THE POWER STANDBY/ON
• Switching on : The STANDBY indicator goes off. The display window lights up.
• Switching standby : The STANDBY indicator lights up. The display window lights goes
off and only the clock is indicated.
ONE TOUCH OPERATION (COMPU PLAY)
• Even when the power is set to STANDBY, pressing the button shown below the
sound system is automatically turned on, a sound source is chosen, and play begins.
• When the OPEN/CLOSE button is pressed, the sound source does not switch, but
the CD door can open or close.
Note: When switching off the power, be sure to press the STANDBY/ON button.
VOLUME, X-BASS AND OTHER CONTROLS
• VOLUME buttons (using the remote control unit)
+ : Use to increase the volume
– : Use to decrease the volume
• X-BASS Buttons
ON : X-BASS indicator lights up. X-BASS sound is activated.
OFF : X-BASS indicator goes off. X-BASS sound is not activated.
• DIMMER Button (using the remote control unit)
When the power is switched on, pressing this button dims the display window's light.
When the button is pressed again, the display window returns to its normal
brightness.
• PRESET EQ Button
POPS : More presence in the vocals and midrange
ROCK: Powerful sound emphasizing treble and bass
CLASSIC: Enriched sound with heavy bass and fine treble
JAZZ: Accented lower frequencies for jazz-type music
FLAT: Natural sound
Function mode
When this button is pressed with a CD loaded,
CD
CD playback begins.
When this button is pressed, the tuner is
TUNER
engaged.
A sound source connected to the LINE IN (AUX)
AUX
terminal can be engaged.
46
Operations
English