Do you have a question about the AX-M84 and is the answer not in the manual?
Questions and answers
Brian Thomson
April 5, 2025
I have a problem with the CD door not raising automatically on my Hitachi AX-M84
1 comments:
Mr. Anderson
April 5, 2025
The CD door on the Hitachi AX-M84 may not be raising automatically due to one or more of the following reasons:
1. Power issues: Ensure the unit is properly connected to a power source and the mains plug is secure. Switch off and unplug before checking connections.
2. Obstruction or damage: Check if there is any physical obstruction or damage preventing the door from moving.
3. Electrical fault: If the unit is not operating normally or appears damaged, switch it off, unplug it, and consult your dealer.
4. Incorrect use: Make sure the equipment is used according to the instructions. Do not force the door or attempt repairs yourself.
5. Exposure to conditions: Avoid placing the unit near heat sources, liquids, or in poor ventilation, as this may affect operation.
If the problem persists, it is recommended to consult your dealer or a qualified technician.
Page 2
SOME DOS AND DON'TS ON THE SAFE USE OF EQUIPMENT This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. ************** DO read the operating instructions before you attempt to use the equipment.
Need help?
Do you have a question about the AX-M84 and is the answer not in the manual?
Questions and answers
I have a problem with the CD door not raising automatically on my Hitachi AX-M84
The CD door on the Hitachi AX-M84 may not be raising automatically due to one or more of the following reasons:
1. Power issues: Ensure the unit is properly connected to a power source and the mains plug is secure. Switch off and unplug before checking connections.
2. Obstruction or damage: Check if there is any physical obstruction or damage preventing the door from moving.
3. Electrical fault: If the unit is not operating normally or appears damaged, switch it off, unplug it, and consult your dealer.
4. Incorrect use: Make sure the equipment is used according to the instructions. Do not force the door or attempt repairs yourself.
5. Exposure to conditions: Avoid placing the unit near heat sources, liquids, or in poor ventilation, as this may affect operation.
If the problem persists, it is recommended to consult your dealer or a qualified technician.
This answer is automatically generated