Appendix; Voltage, Current, And Frequency Ranges - Outback Power Systems FX AND VFX SERIES Installation Manual

APPENDIX

RATINGS
NOMINAL AC OUTPUT VOLTAGE OF AN FX SYSTEM
Single Phase
Series Stacked
Parallel Stacked
Three Phase Stacked
RECOMMENDED FX DC VOLTAGE RANGE
Note: The last two digits in the model number designate the nominal DC voltage. Example: FX2024MT
– 24V DC Voltage.
12V Systems
24V Systems
32V Systems
48V Systems
MAXIMUM DC INPUT CURRENT
Note: This is the maximum DC current the FX will draw from the battery when starting very large AC loads.
It is not used for sizing the DC disconnect or selecting DC cable gauge. It is used to select the minimum
reasonable battery capacity.
12V FXs
24V FXs
32V FXs
48V FXs
29
120 VAC at 60 Hz
120 VAC at 60 Hz per AC output leg / 240 VAC at 60Hz between the AC output legs
120 VAC at 60 Hz on one AC output leg
120 VAC at 60 Hz per AC output leg (limit three) / 208 VAC at 60 Hz between AC output legs
11 – 16 VDC (VDC = volts DC)
22 – 32 VDC
29 – 43 VDC
44 – 64 VDC
600 ADC per FX (ADC = amps DC)
300 ADC per FX
225 ADC per FX
150 ADC per FX