Generator Interfaces - Outback Power Systems FX AND VFX SERIES Installation Manual

GENERATOR AUTO START
The following schematic shows how to hook up a relay that interfaces with the two-wire start
generator. Three-wire start generators require an adapter like the Atkinson GSCM available at
www.atkinsonelectronics.com.
Most 12V relays will work for generator starting.
Select one between 2 and 30 amp contacts. Two
such relays are:
1) Radio Shack SPST 30 amp Auto
Relay #275-226
2) Grainger 10 amp SPDT relay #5ZH14
MFR: Omron #G2R-1-S-DC12
The socket for this relay is:
Grainger #6C898
MFR: Omron #P2RF-05-E
26