Download Print this page

Outback Power Systems M-Series Specification Sheet

M-series rugged mobile power

Advertisement

Quick Links

M-Series
Rugged Mobile Power
We believe that OutBack not only has a superior product, but as
we've quickly learned, also has a tremendous customer and
technical support team.
The OutBack M-Series inverter/charger is an all-in-one mobile
power solution. It incorporates a true sinewave inverter, intelligent
battery charger and an AC transfer switch which includes a 30 amp
pass through and automatic neutral/ground switching.
All M-Series inverter/chargers produce virtually distortion free AC
power for all your mobile electrical needs. Industry leading surge
power starts multiple heavy loads simultaneously without the need
to run your generator. Innovative power factor corrected battery charging uses multiple
stages to recharge your batteries quickly so your generator runs less. Ultra fast AC transfer
switch with battery charger back off circuitry allows you to seamlessly take full advantage of
your shore cord.
OutBack's modular design makes expanding your power system as easy as adding an
additional inverter/charger. Integrated network communications makes system setup and
monitoring easy through a single MATE2M controller. Very quiet operation allows mounting
in noise sensitive areas, even under a bunk. Repairs in the field are easy thanks to a simple
three circuit board design.
The OutBack M-Series inverter is the superior choice when you need a reliable, powerful and
modular true sinewave inverter/charger.
VFX
Vented Construction
– Rick Thompson of Thompson Coach,
True Sinewave AC Output
Fast Battery Charging
High Surge Power Capability
Knoxville, TN
Extremely Rugged
Easy to Use
Very Quiet
"Mount Anywhere" Design
High Efficiency
Neutral/Ground Switching
Networked Communications
Field Serviceable
Standard 2 Year Warranty

Advertisement

loading
Need help?

Need help?

Do you have a question about the M-Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Outback Power Systems M-Series

  • Page 1 Repairs in the field are easy thanks to a simple three circuit board design. The OutBack M-Series inverter is the superior choice when you need a reliable, powerful and modular true sinewave inverter/charger.
  • Page 2 The sealed OutBack M-Series inverter/charger is the most rugged design in the world. Conformal coated circuit boards, powder coated die-cast aluminum chassis with gaskets and o-ring seals keep out water and resist corrosion. Simply put, the sealed M-series is designed to work where other inverter/chargers were never intended to go.

This manual is also suitable for:

Fx2012mtVfx2812mVfx3524mVfx3232mFx 2524mtFx 2532mt