Problem Solving - Euro-Pro SHARK V1310PT Owner's Manual

PROBLEM SOLVING

This appliance was inspected thoroughly and was in good operating condition when it
was shipped from the factory. If a minor problem occurs, it usually can be solved quite
easily when the cause is found. Therefore, this checklist is provided for your
convenience.
PROBLEM POSSIBLE CAUSE
1. Not properly plugged into
wall outlet.
Cleaner Won't
2. No electricity in wall outlet.
3. On/Off switch not turned on.
Run
4. Motor thermostat tripped.
5. Blown fuse/tripped breaker.
1. Full or clogged dust cup.
2. Wrong pile height setting.
3. Clogged nozzle.
4. Clogged dust inlet port.
5. Clogged hose.
Cleaner Won't
6. Broken belt.
7. Hose not inserted fully.
Pick Up
8. Dirty filters.
9. HEPA filter needs cleaning
or replacing.
10. HEPA filter frame needs
cleaning.
Cleaner Picks
Up Moveable
Rugs Or
1. Wrong pile height setting.
Pushes Too
Hard
Agitator Does
1. Broken belt.
2. Belt installed incorrectly.
Not Turn
1. Rotating brush, turbine or
Pet Hair Power
elbow obstructed.
Brush Does Not
2. Belt broken.
Rotate Or
3. Hose obstructed.
Rotates Slowly
4. HEPA filter clogged.
1. Attachment use restricts air
Air Flow
flow.
Restricted With
2. New carpet debris clogging
Attachment Use
air path.
POSSIBLE SOLUTION
1. Plug in firmly.
2. Check fuse or breaker.
3. Push on/off switch to on
4. Reset motor thermostat.
5. Reset circuit breaker or replace fuse.
1. Clean dust cup.
2. Adjust setting.
3. Remove obstruction.
4. Remove power head cover and
remove obstruction.
5. Remove obstruction.
6. Replace belt.
7. Push hose in securely.
8. Clean / change filters.
9. Clean or replace HEPA filter.
10. Clean HEPA filter frame.
1. Adjust setting.
1. Replace belt.
2. Check belt changing and agitator
cleaning.
1. Clear obstructions.
2. Call Customer Service.
3. Clear obstruction.
4. Clean HEPA filter.
1. Check attachment.
2. Remove obstruction.
11
FAMILIARISEZ-VOUS AVEC VOTRE ASPIRATEUR SANS
SAC VERTICAL
1. Poignée
2. Tige de verrouillage de la poignée
3. Tube télescopique
4. Boyau souple
5. Suceur plat
6. Brosse à meubles
7. Bouton de relâche de la poignée
8. Couvercle de la coupelle à
poussière
Spécifications techniques
Tension : 120 V, 60 Hz
Intensité : 12 A
*Avertissement : Les illustrations peuvent différer de l'appareil lui-même.
9. Bouton de relâche de la coupelle
10. Coupelle à poussière (réservoir)
11. Phare
12. Sélecteur de hauteur de tapis
13. Bouton de relâche de la poignée
14. Bouton d'alimentation On/Off
15. Garde-meuble
16. Étrangleur
17. Porte-tuyau
18. Brosse puissante pour poils
d'animaux
28