Advertisement
PROBLEM SOLVING
This appliance was inspected thoroughly and was in good operating condition
when it was shipped from the factory. If a minor problem occurs, it usually can
be solved quite easily when the cause is found. Therefore, this checklist is
provided for your convenience.
PROBLEM
POSSIBLE CAUSE
1. Not firmly plugged in.
2. No electricity in wall outlet.
3. On/Off switch not turned
Cleaner Won't
on.
Run
4. Thermal protector tripped.
5. Blown fuse/tripped
breaker.
1.
Full or clogged dust cup.
2.
Clogged nozzle or dust
cup port.
3.
Clogged hose.
Cleaner Won't
4.
Hole in hose.
Pick Up
5.
Hose not inserted fully.
6.
Motor protection system
activated.
7.
Dirty filters.
Small Air Driven
1.
Rotating brush, turbine or
Turbo Brush
elbow obstructed.
Does Not Rotate
2.
Belt broken.
3.
Hose obstructed.
Or Rotates
4.
HEPA filter clogged.
Slowly
Air Flow
1.
Attachment use restricts
Restricted With
airflow.
Attachment Use
2.
New carpet trimmings
clogging air passage.
Sound Changes
POSSIBLE
1.
Plug in firmly, push on/off
switch to on.
2.
Check fuse or breaker.
3.
Push on/off switch to on
4.
Reset thermal protector.
5.
Reset circuit breaker or
replace fuse.
1.
Clean dust cup.
2.
Remove obstruction.
3.
Remove obstruction.
4.
Replace hose.
5.
Push hose in securely.
6.
Reset thermal protector.
7.
Clean / change filters.
1.
Clear obstructions.
2.
Call 1 (800) 798-7398.
3.
Clear obstruction.
4.
Clean HEPA filter.
1.
Check attachment.
2.
Remove obstruction.
9
GETTING TO KNOW YOUR BAGLESS CYCLONIC
CANISTER
17
Technical Specifications
Main Unit:
Voltage:
120V., 60Hz.
Power:
10.3 Amps
1.
On/Off Button
2.
Cord Rewind Button
3.
Carrying Handle
4.
Dust Cup
5.
Dust Cup Cover
6.
Dust Cup Cover Release
7.
Hose Connector Inlet
8.
Hose Connector
9.
Floor to Carpet Brush
10. Chrome Telescopic Tube
11. Curved Wand/Hose Extension
12. Flexible Hose
13. Air Driven Turbo Brush
14. Crevice Tool
15. Upholstery Brush
16. Trap Door Release Button
17. Small Air Driven Turbo Brush
2
Advertisement
