NOTE:References to rightor left sideof the snow throwerare
determined from behindthe unit in the operatingposition(standing
directlybehindthesnow thrower,facing the handlepanel).
REMOVING
FROM CARTON
1.
Cut the cornersof thecarton and lay the sidesflat on the ground.
Removeand discardall packinginserts.
2.
Movethe snowthrowerout of thecarton.
3.
Makecertainthe carton hasbeen completelyemptiedbefore
discardingit.
LOOSE
PARTS
Tworeplacementaugershearpinsare includedwith this manual.Refer
to ReplacingShear Pinsin the Operationsectionfor moreinformation
regardingshearpin replacement.
ASSEMBLY
1.
Placethe shiftleverin the Forward-6position.
2.
Observethe lowerrear area of the snowthrowerto be sure both
cablesare alignedwith rollerguidesbeforepivotingthe handle
upward.See Figure1.
Figure1
NOTE:Makecertainthe upper endsof eachcableare seatedproperly
in its bracket.
3,
Securethe handlebytighteningthe plasticwing knoblocatedon
boththe left and rightsides of the handle.See Figure2. Remove
and discardany rubberbands,if present.They are for packaging
purposesonly.
/
/
J /
/
/
/
Figure2
/
/
/
/
8