Assembly; Removing From Carton; Loose Parts - Craftsman 247.88787 Operator's Manual

NOTE:All references to the left or rightsideof the snowthrowerare
fromthe operator'sposition.Anyexceptionswill be noted.
REMOVING FROM CARTON
1. Cut the cornersof thecarton and lay the sidesflat on the ground.
Removeand discard all packinginserts.
2. Movethe snowthrowerout of thecarton.
3. Makecertainthe carton has beencompletelyemptiedbefore
discardingit.
LOOSE PARTS
Tworeplacementaugershearpinsare includedin the manualbag.
Referto ReplacingShear Pinsin the Operationsectionfor more
informationregardingshearpin replacement.
ASSEMBLY
1. Observethe lowerreararea of the snowthrowerto be sure both
cablesare alignedwith rollerguidesbeforepivotingthe handle
upward.See Figure1.
NOTE:Makecertainthe cablesare seatedproperlyin the roller
guides.
.
Securethe handleby tighteningthe plasticwingknob locatedon
boththe left and rightsides of the handle.See Figure2. Remove
and discardany rubberbands,if present.They are for packaging
purposesonly.
\
Figure1
f
Figure2
8