4,
5.
Positionthechute assemblyoverthe base. See Figure3.
Closethe flangekeepersto securethe chuteassemblyto the
chute base.See Figure4. The flangekeeperswill click into place
whenproperlysecure.
NOTE:If theflangekeeperswill noteasily click intoplace,use the
palmof your handto applyswift,firm pressureto the backof each.
6,
a.
b.
Removetheflat washerand hairpinclipfrom the end of the
chutedirectionalcontrol.
Insertthe end of the chutedirectionalcontrol intothe lower
bracketand securewith the flat washerand hairpinclip just
removed.See Figure5. If necessary,the lowerbracketcan
be adjusted.Referto ChuteBracketAdjustmentin the
Service & Maintenancesection.
Figure4
J
Figure5
9