Set-Up - Honda HRT216TDA Harmony II Owner's Manual

SET-UP

Unpacking
Remove all the cardboard from the
mower, including the piece around
the handlebar.
Handlebar Setup
Loosen the two knobs on the lower
handlebar enough to raise the
handlebar into the mowing position.
Hold the flywheel brake lever
against the handlebar, and unfold
the handlebar into the mowing
position. Remove the piece of
paper between the handlebar and the frame. Once the handlebar is in
place, tighten the knobs securely.
Grass Bag Assembly (HRR, HRT, HRZ)
Slide the grass bag frame into the grass bag and attach the clips as
shown.
BAG FRAME
Lift the rear discharge guard,
remove the mulching plug, then
install the grass bag.
GRASS BAG
FLYWHEEL BRAKE LEVER
BAG
FRAME
PLASTIC CLIP
GRASS BAG
HANDLE
LOCKING
KNOB (2)
REAR DISCHARGE
GUARD
49