Storage; Preparation For Storage - Honda HRM21PVA Owner's Manual

10. ,STCIRAGE
Preparation for Storage
When the mower will not be used for one month or longer, proper storage
preparation will help to prevent rust and corrosion, and will make it easier to
start the engine when the mower is removed from storage.
1. Clean all surfaces of the mower, including the area underneath the mower
deck. Wear heavy gloves to protect your hands.
NOTE: Before cleaning under the mower deck, turn the fuel valve OFF, and
rest the mower on its left side, so the carburetor side is up. Hard starting
and fuel leakage may result if the mower is placed with the carburetor side
down.
If you use a garden hose to wash the mower, observe the following{
precautions:
l
If the mower has been running, allow the engine to cool for at least half
an hour before spraying water on it. Never spray water on a
hot
engine.
l
Wash the mower using low water pressure, and keep water away from
controls, cable ends, wheel hubs, and all other palces that are difficult
to dry if water enters.
l
After washing, start the engine outdoors, and let it run until it reaches
normal operating temperature to evaporate any water remaining on -the
engine.
l
Stop the engine, turn the fuel valve OFF, and allow the engine to cool
before placing the mower in storage.
2. If equipped with the optional grass bag, wash the bag with a garden hose,
and allow it to dry completely.
1 NOTICE]
Stored lawn clippings are a fire hazard. Always empty the
grass bag after use.
3. Coat areas that may rust with a light film of oil. Lubricate all control cable
cores with a silicone spray lubricant.
44