Table of Contents
Advertisement
3"0 TURN THE TOOL ON/OFF
The button to turn the Craftsman Palm Grip Laser Level ON/OFF is located on
the top housing of the tool, (See Fig° 1)
1o To turn the Palm Grip Laser Level ON, push the "ON/OFF" button down
once.
2,, To turn OFF, push the button down once.
WARNING
When turning
ON the Palm Grip Laser Level, ALWAYS be
aware of protecting
your eyes and those around you. NEVER point the Palm
Grip Laser Level at anyone's face including
your own.
USE OF LASER ENHANCING
SAFETY GLASSES (Supplied) will improve
the performance
of the toot in bright light conditions.
_k
WARNING
Laser Enhancing Safety Glasses WILL NOT protect the
eyes from damage that could result from looking
directly into the laser
projection.
The Palm Grip Laser Level
Is A Two-Piece Device
The All-Position
leveling base has
two built in magnets° One magnet
attaches the palm laser to the
base, Another magnet is located
on the bottom of the base and will
allow it to attach to a steel plate.
Pulling the two pieces apart witl
separate them as shown in Fig. 6.
Fig°6
4B29:[ Manual_Revised06,,0907
Page 7
Advertisement
Table of Contents
