Using The Level With A Tripod; Mounting The Level To A Tripod - Craftsman 320.48291 Owner's Manual

Palm grip laser level with laser trac
Table of Contents


Using The Level With A Tripod (Not Included)
Because the Palm Grip Laser Level is a "for-
ward" projection device, it can be placed on any
reasonably level flat surface to draw a plumb
vertical line, When used in conjunction with any
standard tripod (1/4-20 UNC threaded fitting)
versatility is further enhanced (See Fig° 1!).
Mounting The Level To A Tripod (See Fig. 12)
1. Attach the All-Position
Leveling Base to
the tripod using the standard 1/4-20 UNC
threaded fitting included with the tripod.
(See Fig° 11).
2. Place the level on the All-Position
Fig, 11
3_,Push the "ON/OFF" button once to turn
the level. DO NOT point tool in the direction
of your eyes or anyone else's eyes in the
vicinity of use,
4. Determine a line with two points A, B (Fig_ 12). Align your laser fan beam to
these points.
Fig° 12
M anuaLRevised~06
Page t0


Table of Contents

Table of Contents