Download Print this page

Advertisement

ction
LEVEL
z_ CAUTION
Read, understand and follow
all Safety Rules and Operating Instructions
in this Manual before using this product.
Sears, Roebuck
and Co.,
Hoffman
Estates, IL 60179 U.S.A.
Visit our Craftsman
website:
www.craftsman.com
o"WARRANTY
° SAFETY
° DESCRIPTION
° OPERATION
o APPLICATIONS
o MAINTENANCE
° TROUBLESHOOTING

Advertisement

   Also See for CRAFTSMAN 320.48293

   Summary of Contents for CRAFTSMAN 320.48293

  • Page 1

    ° SAFETY all Safety Rules and Operating Instructions ° DESCRIPTION in this Manual before using this product. ° OPERATION Sears, Roebuck and Co., o APPLICATIONS Hoffman Estates, IL 60179 U.S.A. o MAINTENANCE Visit our Craftsman website: www.craftsman.com ° TROUBLESHOOTING...

  • Page 2

    Back Cover ONE YEAR FULL WARRANTY ON CRAFTSMAN TOOL tf this Craftsman tool fails to give complete satisfaction within one year from date of purchase, RETURN ITTO ANY SEARS STORE OR OTHER CRAFTSMAN OUTLET IN THE UNITED STATES FOR FREE REPLACEMENT.

  • Page 3: Safety Symbols

    The purpose of safety symbols is to attract your attention to possible dangers° The safety symbols, and the explanations with them, deserve your careful attention and understanding_ The symbol warnings DO NOT by themselves eliminate any danger. The instructions and warnings they give are no substitutes for proper accident prevention measures.

  • Page 4

    Z_ WARNING: BE SURE to read and understand all instructions in this manual before using this level, Failure to follow all instructions may result in hazardous radiation exposure, electric shock, fire and/or serious personal injury. SAFETY PRECAUTIONS LASERS WARNING: Use of controls, adjustments or performance procedures...

  • Page 5

    SAFETY PRECAUTIONS FOR LASERS cont. DO NOT operate the LaserTrac level around children or allow children operate the toolo Serious eye injury could result. ALWAYS turn the LaserTrac level off when not in use° Leaving the tool on increases the risk of someone inadvertently staring into the laser beam.

  • Page 6

    KNOW YOUR LEVEL Fig. 1 LCD Display Screen Encased Bubble Vial Integrated 24_in_ruler Laser On Demand Button Base 1/4-in. ,readed Hole Encased Bubble Vial Compartment Light Aperture Fig. la...

  • Page 7: Operation

    Use the level manually, hand held, or mounted on a Craftsman tripod 9-00000 (sold separately) Use the digital level inside or outside to measure pitch in inches of rise per foot of run.

  • Page 8

    1/4 -inch Tripod Threaded Hole - Allows level to be mounted to Craftsman tripod 9-00000, sold separately. 16o Battery Compartment - Holds two "AAA" batteries to power Laser Trac TM system and LCD display..

  • Page 9

    SCREEN ICONS o ---ti' Up/Down indicator - The zero line (0 °) indicates the level position° _" The arrow indicates the current angle's position, either up or down away from the level (0°)_ Battery Power Icon - Indicates the amount of battery power in the unit,.

  • Page 10

    POWER BUTTON AND LCD DISPLAY Press the Power button to turn the LCD display screen on,, When the screen first comes on, the temperature is displayed in Fahrenheit for about 2 seconds, to indicate if level is being used in optimum operating temperature range.

  • Page 11

    PLUMB cont. (Fig. 5) The LCD display shows the surface with the level, on it as a fine, and true plumb another line either to the left or right of the line for plumb, and the degree to with the surface is off, with an arrow showing whether...

  • Page 12

    (Fig. 8) SLOPE The digital laser level measures the slope of a surface in percenL This is useful when laying pipe for proper drainage. When the conversion button is in the slope mode, it will display the surface being measured in percent, with exact level at 0°0% tf the beeper...

  • Page 13

    ALIGNMENT- TO USE LEVEL WITH TRIPOD (Figs. 10, 1 1 and This level can be used with a tripod 9-48278 (sold separately) to project a beam for level up to 300-fL away This feature is perfect for home improvement projects such as aligning pictures, chair rails and other wai! fixtures,...

  • Page 14

    ALIGNMENT -TO USE LEVEL WITH TRIPOD cont. (Figs. 10, 11 and 12) The laser projects a dot on the targeted surface (see Fig. t2) and the size and shape may vary according to temperature, distance and target surface material. ALWAYS use the center point of the dot for your measurement°...

  • Page 15

    CURRENT READING HOLD BUTTON AND MEMORY RECALL To hold the information of the current reading, press the Hold button. The level can hold nine different readings in its memory. To read out the measurements, press the Memory Recall button. The last nine measurements can be read out, beginning with the most recently...

  • Page 16: Maintenance

    This digital laser level has been designed to be a low-maintenance tool.. However, in order to maintain its performance, follow these steps.. 1.. HANDLE the tool with care, Treat it as a precision optical device, such as a camera or binoculars° AVOID exposing the tool to shock, continuous vibration...

  • Page 17

    There is a Craftsman Tripod 9-48278 that can be use with your 24-inch level° It has a _/4-in., threaded screw that fits the 1/4-in_ threaded screw hole on the level. Visit your local Sears store or other Craftsman outlets or shop sears,cor!!craftsman.

  • Page 20: Accessories

    Your Home For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and t :, owner's manuals that you need to do-it-yourself For Sears professional installation of home appliances...

Comments to this Manuals

Symbols: 0
Latest comments: