Table of Contents
Advertisement
To auto-scan between sensors, press and hold
CHANNEL for 2 seconds. Each sensor's data will be
displayed for 3 seconds. To end auto-scan, press MEM
or CHANNEL.
If you use a sensor that collects only
NOTE
temperature data, humidity will not be shown.
MINIMUM / MAXIMUM RECORDS
Press MEM to toggle between current, maximum (MAX)
and minimum (MIN) records for the selected sensor. To
clear the records, press and hold MEM for 2 seconds.
A beep will sound to confirm that the memory has been
cleared.
TEMPERATURE AND HUMIDITY TREND
The trend lines are shown near the Temperature and
Humidity readings.
Trend
Rising
ICON
RMR612HGA lab test R2
Steady
Falling
10
10
RESET SYSTEM
The RESET buttons are located in the battery
compartments for the main unit and remote sensors.
Press RESET when you change the batteries and
whenever performance is not behaving as expected (for
example, unable to establish radio frequency link with
remote sensor or radio-controlled clock).
NOTE
When you press RESET, all settings will return
to default value, and you will lose all stored information.
SAFETY AND CARE
Clean the product with a slightly damp cloth and alcohol-
free mild detergent. Avoid dropping the product or placing
it in a high-traffic location.
1/17/04, 4:58 PM
Hide quick links:
Advertisement
Table of Contents
