Oregon Scientific PRYSMA R Manual

EN
INTRODUCTION
PRODUCT INTRODUCTION
LCD Display
Time Display
Outdoor Temperature Indoor Temperature
Display Display
LCD Display
Symbol Description
Radio signal reception to Indicates the strength of the
outdoor unit (RTHN129) radio reception
Indicates low battery power of
Low battery
outdoor unit (RTHN129)
Alarm 1 on
Appears when an alarm is
activated
Alarm 2 on
Appears when RF clock data
RF antenna icon
received
Shows outdoor temperature of
OUT 12345 Outdoor sensor reading
selected sensor.
IN Indoor sensor reading Shows indoor temperature
ZONE Time zone Indicates selected time zone
Projection
Time Display Outdoor Temperature Display
(channel 1 only)
Focus length (1.5m – 2m)
NOTE
GETTING STARTED
Connecting the main unit to power supply
Inserting batteries into remote thermo sensor
RESET inside the sensor after each battery change.
Placement of the main unit
Only use this device indoors in a dry location.
Placement of the remote thermo sensor (RTHN129)
Max 50m
Max 1.5m
NOTE
KEY DESCRIPTIONS
Top
SNOOZE
Back
Reset
°C / °F Light
Flip 180°
RADIO RECEPTION
receive a valid signal.
Symbol Description
RF antenna
icon off
RF antenna
icon on
Clock signal reception indicator:
Symbol
Strong signal
Weak signal
No signal
Receiving signal
Radio reception disabled
NOTE
appliances. Other causes of signal interference include electrical
Function
Enabling/disabling radio reception
SEARCH
SEARCH
SEARCH
SETTING TIME MANUALLY
SEARCH
. The screen displays ZONE
DISPLAYING TIME AND DATE
ALARM FUNCTION
Setting/adjusting alarm time
.
and
and
Snooze function
To use the SNOOZE
Displaying the alarm time
Activating/deactivating the alarm
BACKLIGHT
NOTE
PROJECTION
the Snooze
NOTE
TEMPERATURE FUNCTION
&
and
and
be displayed in sequence.
RESETTING THE CLOCK
NOTE
REMOTE SENSOR
CH
EU/UK/US
SEARCH
RESET
have been replaced.
NOTE
SPECIFICATIONS
MAIN UNIT
L x W x H
Weight
Operating range
Temperature resolution
Temperature unit
REMOTE THERMO SENSOR (RTHN129)
L x W x H
Weight
Operating range
Temperature resolution
No. of channel selectable 5
RF Transmission range
Function
The icon is turned off to indicate that the
main unit has not received RF clock data for
at least 1 hour and 15 minutes.
The icon is turned on when the main unit has
received RF clock data.The icon will turn off if
no data is received for 1 hour and 15 minutes,
or the clock time is adjusted manually.
Description
and
and
SNOOZE
and .
and .
Light to toggle
Flip 180
s
22 x 200 x 80 mm
224 g without batteries
-5.0 °C to +50.0 °C (23.0 °F to 122.0 °F)
0.1 °C (0.2 °F)
°C/°F
125 x 50 x 19.5 mm
59 g without batteries
-20 ºC to +60 ºC (-4 ºF to 140 ºF)
0.1 ºC (0.2 ºF)
50 m
SAFETY
using this product.
the device.
CARE
This product is designed to give you years of service if handled properly.
ADVICE REGARDING BATTERIES
the applicable legal regulations.
NOTE
ABOUT OREGON SCIENTIFIC
.
FCC STATEMENT
WARNING
NOTE
the receiver is connected.
DECLARATION OF CONFORMITY
declare that the product
EU-DECLARATION OF CONFORMITY