Table Of Contents; Safety Symbols - Craftsman nextec 320.10003 Operator's Manual

Warranty Page 2
Safety Symbols Page 3
Safety Instructions Pages 5-12
Description Pages 13-14
Assembly Page 15
Operation Pages 16-26
Maintenance Pages 26-28
Troubleshooting Page 29
Exploded View and Parts List Pages 30-31
Sears Repair Parts Phone Number Back Cover
ONE YEAR FULL WARRANTY ON CRAFTSMAN® TOOL
If this Craftsman tool fails to give complete satisfaction within one year
from the date of purchase, return it to any Sears store or Parts & Repair
Center or other Craftsman outlet in the United States for free repair (or
replacement, if repair proves impossible).
This warranty does not include expendable parts such as lamps,
batteries, bits, or blades.
This warranty applies for only 90 days from the date of purchase if this
product is ever used for commercial or rental purposes.
This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state.
Sears, Roebuck and Co., Hoffman Estates IL 60179
iNTRODUCTiON
SAVE THESE INSTRUCIONS!
This cordless Drill has many features for making its use more pleasant and en-
joyable. Safety, performance, and dependability have been given top priority in
the design of this product making it easy to maintain and operate.
WARNING: Some dust created by using power tools contains chemicals
known to the state of California to cause cancer and birth defects or other
reproductive harm.
The purpose of safety symbols is to attract you attention to possible dangers.
The safety symbols and the explanations with them deserve your careful atten-
tion and understanding. The symbol warnings do not, by themselves, eliminate
any danger. The instructions and warnings they give are no substitutes for
proper accident prevention measures.
WARNING: Be sure to read and understand all safety instructions in this
manual, including all safety alert symbols such as "DANGER," "WARNING," and
"CAUTION," before using this Drill. Failure to follow all instructions listed below
may result in electric shock, fire, and/or serious personal injury.
SYMBOL SIGNAL MEANING
_. DANGER: Indicates an imminently hazardous situation, which, if not
avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury.
CAUTION: Indicates an imminently hazardous situation, which, if not
avoided, may result in death or serious injury.
NOTE: (Without Safety Alert Symbol) Indicates a situation that may result in
property damage.
WARNING: To ensure safety and reliability, all repairs should be performed
by a qualified service technician at a Sears Service Center.
A
WARNING: The operation of any power tool can result in
foreign objects being thrown into your eyes, which can result
in severe eye damage. Before beginning power tool operation,
always wear safety goggles or safety glasses with side shield
and a full face shield when needed. We recommend a Wide
Vision Safety Mask for use over eyeglasses or standard safety
glasses with side shields. Always use eye protection which is
marked to comply with ANSI Z87.1.
SAVE THESE INSTRUCTIONS
10003 ManuaLRevised_08 0724 Page 2 10003 ManuaLRevised_08 0724 Page 3