GE GTS18HBMFRCC Owner's Manual And Installation Instructions page 19

Installation Instructions
[] REMOVE THE FRESH FOOD
DOOR
3.1 Tape the door shut with masking tape.
[] REMOVE THE FRESH FOOD
DOOR (CONT.)
3.4 Set the door outside-up on a non-scratching
surface.
3.2 Using a 5/16" hex-head socket screwdriver and
a 5/16" open-end wrench, remove the two
screws holding the center hinge (and the shim
glued to it) to the cabinet. Lift the center hinge
to fi'ee its pin from the socket in the top of the
door, and set hinge and screws aside. Be careful
not to lose the center hinge spacer and washer.
3.3 Remove the tape and tilt the door away from the
cabinet. Lift tile door from tile pin in tile bottom
hinge bracket. (ffthe plastic washer sticks to tile
door bottom, put it back on the hinge.)
3.5 Transfizr the two ,screws from the opposite side of
the cabinet to tile screw holes ,racated by the center
hinge remo'ral.
/
J
3.6 Transfer the vcasher (if your model has one) to the
opposite side.
3.7 Take one of the screws removed in step 2 and start
it in tile outermost screw hole on the opposite side.
Do not drive it all the way do,aqa-leave enough
space under the screw head for thickness of" shim
and bracket.
IJ
o
19