GE GTS18HBMFRCC Owner's Manual And Installation Instructions page 11

Behind the Refrigerator
Be careflll when moving the refrigerator
av_-ayfrom the wall. All types of floor
coverings can be damaged, particularly
cushioned coverings and those with
embossed surfhces.
Turn tile leveling legs at each front corner
of tile refrigerator counterclockwdse until
the rollers support tile refrigeraton Pull tile
refrigerator straight out and return it to
position by pushing it straight in. Moving
the refrigerator in a side direction may
result in damage to the floor covering or
refrigerator.
Whenpushingthe refrigeratorback,makesure
youdon'troll over thepower cordor icemaker
supplyline (onsomemodels).
After rolling the refrigerator back into
place, turn the legs clockwise until tile
legs again bear the weight of the
refrigeraton
Light Bulb Replacement
To replace a burned-out bulb, unplug
the refrigerator from its electrical outlet,
unscrew the bulb when cool and replace
it witb an appliance bulb of the same or
lower wattage.
Turningthe controlto theOposition doesnot
removepower to the light circuit.
Preparing for Vacation
For long vacations or absences, remove
food and unplug tim rel¥igeraton Move
the temperature control dial to the 0
position, and clean the interior with a
baking soda solution of one tablespoon
(15 ml) of baking soda to one quart
(1 liter) of water. Leave the doors open.
Set the icemaker power s,Mtch to the
0 (Off) position or move the fL_eler arm to
the STOP (up)
position (depending on
model) and shut off the water supply to
the refrigerator:
If tbe temperature can drop below
freezing, have a qualified servicer drain
the water supply system (on some
models) to prevent serious property
damage due to flooding.
Preparing to Move
Secure all loose items such as grille,
shelves and drawers by taping them
securely in place to prevent damage.
Be sure therefrigeratorstaysin an upright
position duringmoving.
11