Craftsman 320.16490 Operator's Manual page 63

MOVING THE STAND
WARNING: Before moving your
work stand, always fully tighten all
the mounting bolts and nuts. Failure
to do so could result in serious
personal injury.
1. Place the stand assembly on its
side on a flat surface as shown
in Fig. 19.
2. To fold up the legs, depress
the locking pin (Fig. 3) and
rotate the legs into position;
you will hear a "click" to signal
that the legs are locked in place
(Fig. 20).
3. Check and tighten all the
mounting bolts and nuts.
4. Lift the stand and move it as
shown in Fig. 21.
Fig. 19
Fig. 20
Fig. 21
16490 Manual_Revised_12-0604 Page 17