Craftsman 320.16490 Operator's Manual page 61

5.
With the miter saw mounted
on the quick-release mounting
brackets (B), place the
assembly onto the work stand
(Fig. 13).
MOUNTING THE ROLLER
ASSEMBLIES
1. Insert the roller assemblies (L)
into the mounting slots
(Fig. 14).
2. Adjust the height of the roller
assemblies (L) as needed.
3. Lock the roller assembly in
position by tightening the
locking knob (K) (Fig. 15).
4. A roller assembly may also be
used as a stationary stop guide
for repetitive cuts.
Fig. 14
St°p_ii
Fig. 15
K
16490 Manual_Revised_12-0604 Page 15