Craftsman 320.16490 Operator's Manual page 20

,_ WARNING: When servicing, use only identical replacement parts. Use of any
other parts may create a hazard or cause product damage.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible
to damage from various types of commercial solvents and may be damaged by
their use. Use clean cloths to remove dirt, dust, oil, grease, etc.
WARNING: When servicing, use only identical replacement parts. Use of any
other parts may create a hazard or cause product damage. To ensure safety and
reliability, all repairs should be performed by a qualified service technician.
,_WARNING: Keep the miter saw stand dry, clean, and free from oil and
grease. Always use a clean cloth when cleaning. Never use brake fluids,
gasoline, petroleum based products or any strong solvent to clean the bench
grinder stand. Chemicals can damage, weaken or destroy plastic which may
result in serious personal injury.
NOTICE: If the mounting bracket
requires adjustment to mount Fig. 27
securely on your stand: Phillips Screw
* Release the nut by turning
it counterclockwise. Nut
Tighten the Phillips Screw
by turning it clockwise, and
tighten the nut by turning
it clockwise.
Page 20 16490 ManuaLRevised_12 0604