Advertisement
Available languages
Available languages
•
Store
properly.
Do not store the miter saw stand
outdoors
or in a
damp
location.
•
Do not stand
or climb on miter saw stand.
It could tip over, causing
serious injury.
•
Do not permit
children
to use the stand
unsupervised.
It is not a toy.
•
Be sure all locking pins are in the set-up
position
holes before using your
miter saw and miter saw miter saw stand.
=
Take care when moving the stand, especially
when a miter saw is mounted.
=
Dress properly.
Do not wear loose clothing
or jewelry. Keep your hair,
clothing
and gloves away from moving parts. Loose clothes,
jewelry or long
hair can be caught in moving parts. Always wear non-slip
footwear.
Tie back
long hair. Roll long sleeves above the elbow.
=
Always firmly attach the miter saw used with this stand. Do not attempt to
use the miter saw on your work stand until the miter saw is fastened firmly.
Be aware
of tipping.
When a large piece is cut from one end of a job, the
remaining
piece may be heavy enough to tip the Miter Saw Stand. Always
ensure the workpiece
is well supported.
Always
keep all guards
in place. Be sure all power tool guards are in good
working
order and are in proper adjustment
and alignment.
Always
keep your hands away from the cutting
area.
16490
Manual_Revised_12-0604
Page 7
Advertisement
