Advertisement
Available languages
Available languages
/ONE
YEAR FULL WARRANTY
If any part of this Craftsman Router is defective in material or workmanship within one year
from the date of purchase, return it to your nearest Sears Parts & Repair Center, and it will
be repaired or replaced free of charge.
WARRANTY
SERVICE IS AVAILABLE BY CONTACTING SEARS SERVICE
AT 1-800-4-MY-HOME. ®
This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state.
Sears Roebuck and Co. Dept. 817 WA Hoffman Estates, IL 60179
J
General Safety Instructions
for Power Tools
................
2, 3
Additional Safety Rules for Reuters
.......................
4-6
Functional Description, Specifications, and Parts List ...........
7, 8
Assembly
...........................................
9, 10
Operation
..........................................
11-14
Maintenance
...........................................
15
I __WARNING
_Read and understand the tool manual and these instructions.
Failure
I
to follow all instructions listed below may resutt in serious personal injury.
Work Area
Keep your work area clean and well lit.
Cluttered benches and dark areas invite
accidents.
Do not operate power tools in explosive
atmospheres,
such as in the presence of
flammable liquids,
gases, or dust. Power
tools create sparks that may ignite the dust
or fumes.
Keep bystanders,
children, and visitors
away while operating a power tool.
Distractions can cause you to lose control.
Electrical Safety
Double Insulated tools are equipped with
a polarized plug (one b=ade is wider +"--,,,=,,
the other.) This plug will fit in a polarized
outlet only one way. If the plug does not fit
fully In the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician
to install a polarized outlet. Do not change
the plug in any way. Double Insulation []
eliminates the need for the three wire
grounded power cord and grounded power
supply system.
Before plugging in the tool, be certain the
outlet voltage supplied is within the
voltage marked on the nameplate. Do not
use "AC only" rated tools with a DC power
supply.
Avoid body contact with grounded
surfaces such as pipes, radiators, ranges
and refrigerators. There is an increased risk
of electric shock if your body is grounded.
If operating the power tool in damp locations
is unavoidable, a Ground Fault Circuit
Interrupter must be used to supply the power
to your tool. Electrician's rubber gloves and
footwear will further enhance your personal
safety.
Don't expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
Do not abuse ihe uord. Ne_er use the cord
to carry the tools or pull the plug from an
outlet. Keep cord away from heat, off,
sharp edges or moving parts. Replace
damaged cords immediately. Damaged
cords increase the risk of electric shock.
When operating a power tool outside, use
an outdoor extension cord marked "W-A"
or "W." These cords are rated for outdoor
use and reduce the risk of electric shock.
Refer to "Important Information about
Extension Cords".
2
Advertisement
