Table of Contents
Advertisement
Adjusting Oven Temperature
The temperature
in the oven has been pre-set at the factory. When first using the oven, be
sure to follow recipe times and temperatures.
If you think the oven is cooking too hot or
too cool for the temperature
you select, you can adjust the actual oven temperature to be
more or less than what is displayed. Before adjusting, test a recipe by using a temperature
setting that is higher or lower than the recommended
temperature. The baking results
should help you to decide how much of an adjustment is needed.
INSTRUCTIONS
To adjust
the oven temperature
higher
1.
Press O
for 6 seconds. 0 ° will appear in the display (Figure 1).
2.
To increase the temperature
use the number pads to enter the
change.
(Example 30°F) (_)
@
(Figure 2).
desired
The
temperature may be increased by as much as 35°F (19°C).
PRESS
®@
3.
Press
Ito accept the temperature change and the display
or
will return to the time of day (Figure 3). Press
change if necessary.
to reject the
To adjust
the oven temperature
lower
1.
Press O
for 6 seconds. 0 ° will appear in the display (Figure 4).
2.
To decrease the temperature use the number pads to enter the
change.
(Example -30°F)(_)
(_
and then press
desired
_
(Figure 5).
temperature may
by as
The
be decreased
much as 35°F (19°C).
3.
Press
Ito accept the temperature change and the display
will return to the time of day (Figure 6). Press _i'o_}_) t o reject the
v
change if necessary.
®@
®
or
©
Note: The oven
temperature
adjustments
made with this feature will
not change the Self-Clean
cycle temperature or the
Broil temperature.
DISPLAY
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
To Set the Oven Control
Back To The Factory Default Settings
This function allows you to reset the user defined settings back to the original settings. These include 12 or 24 Hour
Time of Day Display, Continuous Control Operation or 12 Hour Energy Saving mode, Silent Control Operation or
Normal Sounds, Fahrenheit or Celsius Temperature
Display, Oven Temperature
Adjustment (set back to 0).
1.
Press and hold (_
until the first single beep sounds (about 6 seconds)
2.
After the first beep, press i
pad once. All the setting are now set to the original factory default.
19
Hide quick links:
Advertisement
Chapters
Table of Contents
