Setting the Clock
Bake or 12 Hour Energy
The TIMER ON/OFF _%_ and CLEAN _ea_ pads control the Continuous Bake or 12 Hour Energy Saving features.
The oven control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven
control is left on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for
To set the control
Bake or 12 Hour
Press and hold _
for 7 seconds (Figure1). After 7 seconds
"12h" or "- -h" will appear in the display and the control will
(_ean_ to switch between the 12 Hour Energy Saving and
continuous bake features. Note: "12h" (Figure 2) in the display
indicates the control is set for the 12 Hour Energy Saving
mode and % -h" indicates the control is set for the Continuous
Bake feature (Figure 3).
to time of day) or press @
to reject the change.
The TIMER ON/OFF _%_ pad controls the Timer feature. The Timer serves as an extra timer in the kitchen that will
beep when the set time has run out. It does not start or stop cooking. The Timer feature can be used during any of the
other oven control functions. Refer to "Minimum and Maximum Control Pad Settings" for time amount settings.
To set the Timer (example
for 5 minutes)
% - - -" will appear and "TIMER" will flash in the
display (Figure 5).
Press the number pads to set the desired time in the display
p. The time will begin to count
down with "5:00" and "TIMER" will stay in the display (Figure
6). Note: If q
is not pressed the timer will return to the
time of day after 25 seconds.
When the set time has run out, "End" and "TIMER" will show in
the display (Figure 7). The clock will sound with 3 beeps every
5 seconds until _,%_ is pressed.
the set time has
The display will return to the time of day.