Press; Press Ito Accept The Change; Figure 1 - Frigidaire PLES399ECI Control Manual

Consumer Defined Controls (co.{=..ed)
Setting Temperature Display m Fahrenheit or Celsius:
The BROIL and CLEAN _ea_ pads control the Fahrenheit or Celsius temperature display modes. The oven
control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory
to display in Fahrenheit.
INSTRUCTIONS PRESS DISPLAY
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit
for7 seconds
To tell if the display is set for Fahrenheit or Celsius press
(Figure 1) and hold for 7 seconds; "550 °'' will appear and
"BROIL" will flash in the display and a beep will sound. If "F"
appears, the display is set to show temperatures in Fahrenheit
(Figure 2). If "C" appears, the display is set to show
temperatures in Celsius (Figure 3).
Press (_ea_ to switch between Fahrenheit or Celsius display
modes. The display will show either "F" (Figure 2) or "C"
(Figure 3).
Press Ito accept the change or press _,)o_ to reject the
change.
2 @
or©
Figure 1
Figure 2
Figure 3