Table of Contents
Advertisement
Automatic
Ice and
Water
Dispenser
(continued)
4. You must replace existing large O-ring on Filter housing. First remove old ring and
discard. (Youmayneedtouseatoothpicktogetunderring,
NOTE: Usecaution
so that groove that holds ring is not damaged!)
CareFully remove new O-
ring From sealed bag. Gently roll O-ring into place, into containment
groove
above threads.
5. Remove packaging From Filter cartridge.
6, Place Filter cartridge in cup. The end with the small o-ring should be up, out oF
the cup.
7, Screw cup, with Filter, back onto housing. DO NOT USEWRENCH TO REINSTALL
CUP. Filtercartridgewillselr-alignascupistightened.
Besurecupiscompletely
tightened with P_Sour_
TM
Logo facing outward. DO NOT TIGHTENPASTSTOP.
8. Set ice maker lever to the ON (down) position.
9. Check For leaks. Open refrigerator door, Wipe any water drops from Filter cup,
Run a glass or water.
IFthere is a leak, unscrew filter cup, and reinsert Filter
cartridge. Check placement of large O-ring (seedirections following).
Reinstall
Filter cup,
10. To condition filter system and purge air From water line, run several glasses
or water through
water dispenser.
This will also assure the purest water
possible is stored in water tank.
Figure
1
Filter Housinc
Rememberto keepyour wrench handy!
Figure
2
TWIST TO REMOVE
8
Advertisement
Table of Contents
