Frigidaire FSC23F7HB4 Use & Care Manual page 8

ALLOWING COOLING TIME BEFORE USE
To ensure safe food storage, allow your refrigerator to operate with
the doors closed for at least 8 to 12 hours before placing food inside.
During this cooling period, you do not need to adjust the controls,
which are preset at the factory.
SETTING COOLING TEMPERATU RES
Your refrigerator comes with a state-of-the-art electronic digital
control system. The system's control panel is located at the top of the
the fresh food compartment.
The two digital displays on the Ieft half of the control panel indicate
the current settings or temperatures of your freezer and fresh food
compartments. The models with a 2-digit temperature display are for
reference only',and do not display the current accurate compartment
temperature. Should you desire to see what the current accurate
temperature is, place a separate thermometer inside the freezer or
fresh food compartment in the desired location.
TEMPERATURE ADJUSTMENT
After 24 hours, adjust the controls as needed. Make your
adjustments sma!l and gradual; allowing time for temperatures
to change and stabilize. Refer to the adiacent guidelines for
temperature settings.
To adjust the temperature to a higher or lower setting, press the
Up or Down button closest to the display. The first time you
press the button, the display shows the last setting you entered.
Each press of the button after that increments the setting by
one degree.
The display shows your new setting momentarily, then changes
back to the current temperature.
Temperature Adjustment Guide
toowarm / Adjust Fresh Food control one degree
if Fresh Food compartment is
L
colder by pressing Down (Colder) button.
cold [ Adjust Fresh Food control one degree
If Fresh Food comparb'nent is too
L
warmer by pressing the Up (Cold) button
Freezer compartment is toe warm [ Adjust Freezer control one degree colder
If
L
by pressing Down (Colder) button.
if Freezer compartment is too cold /
Adjust Freezer control
one
degree warmer
L
by pressing the Up (Cold) button.
IF TEMPERATURE DISPLAYS FLASH...
If ever you see both temperature displays continously flashing,
it may indicate that the control system has detected a
performance probiem. Call your service representative, who
can interpret the flashing message.
To maintain temperatures, a fan circulates air in the refrigerator
and freezer compartments. For good circulation, do not block
cold air vents with food items.
Temperature Display (2-Digit)
Freezer Fresh Food
C °
AIR FILTER INDICATOR & STATUS LIGHTS
Your refrigerator's air fiiter needs to be replaced from time to
time. You can monitor the need for replacement by referring to
the status iight while the air filter is "ON". To turn on the air fiiter,
press the "Air Filter" button. To turn off the air filter, press the
"Air Filter" button. To RESET the air filter, press the "Air Filter"
button and hold for 3 seconds.
Air Filter Status Light (not available on all models)
Green Filter OK.
Yellow Air filter is about 80 percent used. Please order new one.
Red Air filter is 100 percent used. Please change now.