Optimal Operation - Frigidaire FAC12C2ABJW Instruction Manual

To set the stopping time
1. Push the TIMER OFF button and the remote controller will show TIMER OFF,
the last set time for the stopping operation and the signal "h"wilt be shown
on the DIGITAL DISPLAY area. You are now ready to reset the time of the
STOP operation,
2. Push the TIMER OFF button again to set the time you want to stop the
operation.
3. After setting the TIMER OFF ,there will be a one-half second delay before the
remote controller transmits the signal to the air conditioner. Then, after
approximately another 2 seconds, the signal "h" disappears and the set
temperature will re-appear on the digital display.
Exernples:
ON
ON
6h 6h
(T_mp On) (Te r_p Off)
ON
ON
ONN
....oFLJ
= ,, . =
,,..... >
12h 14h 20h 23h
('rempOf0 (TeTepOn) (Temp On) {Temp Off)
Optimal operation
To achieve optimal performance, please note the following:
1. Adjust the air flow direction correctly so that it is not directed on people.
2. Adjust the temperature to achieve the highest comfort level. Do not adjust
the unit to excessive temperature levels.
3. Close doors and windows on COOL or HEAT modes, or performance may be
reduced.
4. Use TIMER ON button on the remote controller to select a time you want to
start your air conditioner.
5. Do not put any object near air inlet or air outlet, as the efficiency of the air
conditioner may be reduced and the air conditioner may stop running.
6. Clean the air filter periodically, otherwise cooling or heating performance may
be reduced.
7. Do not operate unit with horizontal louvre in closed position.
@