Table of Contents
Advertisement
Surface
Burner
Grate
Figure 1
Orifice
holder
Surface
C_eaning the Burner
Grates,
Burner
Caps, Burner
Heads
The Bumer Grates, Burner Caps, and Burner Heads should be routinely cleaned,
Keeping the burner ports clean will prevent improper ignition and an uneven flame
at each burner position, Refer to the following instructions:
To Remove and RepJace the Surface Burner Grate, Surface Burner Cap and
Surface Burner Head - Remove in the following order; (1 st) Surface Burner Grate,
(2nd) Surface Burner Cap, (3rd) Surface Burner Head (See Figure 1),
Reverse the procedure above to replace the Surface Bumer Cap, Surface Burner
Head and Surface Burner Grate, Do not remove any burner parts from the
cooktop
until the burner parts have completeJycooled
and are safe to handle.
Do not operate the surface burners without the Surface Burner Caps, Surface
Burner Heads and Surface Burner Grates property
in ptace.
To Ctean the Burner Caps, Burner Heads and Grates- Use a soap-filled scou ring
pad ora mild abrasive cleanser to dean the surface burner caps and surface bumer
heads, The Grates and the outer vent covers are designed to be Dishwasher safe
for cleaning, The ports (or slots) around the bumer heads must be routinely denned,
If residue still remains in these ports, use a smaDgauge wire or needle to clean the
slots or holes, For proper flow of gas and ignition of the burner--DO
NOT ALLOW
SPILLS, FOOD, CLEANING AGENTS OR ANY OTHER MATERNAL TO ENTER
THE GAS ORIFICE HOLDER OPENING. ALWAYS keep the surface burner cap
and surface burner head in place whenever a surface burner is in use,
Surface
Burner
Surface
Burner
OuterVent
Grate
Caps
Covers
Surface Burner
Heads
@@
THE COOKTOP iS NOT REMOVABLE.
Do not attempt to remove or lift the cooktop,
THE iNNER VENT iS NOT REMOVABLE.
Do not attempt to remove the inner vent cover,
Use caution when replacing the burner cap so the electrode is not damaged, This may cause a delayed ignition
or prevent the burner from igniting,
Any additions, changes or conversions required in order for this appliance to perform satisfactorily must be
made by authorized servicer,
19
Advertisement
Table of Contents
