Setting The Clock And Minute Timer - Frigidaire GEF365CHSA Owner's Manual

Ceramic glass cooktop electronic oven control self-cleaning oven interior
Table of Contents

Advertisement

Setting the Clock and
Minute Timer
Note: The oven function will not work
if the time of day clock is not set.
To Set the Clock
When the range is first plugged in, or when the power supply to the range has
been interrupted,
the display will flash '12:00 N.
1. Push CLOCK.
2. Within 5 seconds, push and hold the UP or DOWN ARROW until the correct
time of day appears in the display.
Note: The clock cannot be changed during any timed bake or self-clean
cycle.
To Set the
Minute
Timer
1, Push TIMER ON/OFF.
2. Push the UP ARROW to increase the time in one minute increments. Push
and hold the UP ARROW to increase the time in 10 minute increments. The
timer can be set for any amount of time from 1 minute to 11 hours and 59
minutes.
Note:
If you push the DOWN ARROW first, the timer will advance to 11
hours and 59 minutes.
3, The display shows the timer
count down
in minutes until one minute
remains. Then the display will count down in seconds.
4. When the set time has run out, the timer will beep 3 times. It will then
continue to beep 3 times every 60 seconds until TIMER ON/OFF is pushed.
Note:
The minute timer does not start or stop cooking. It serves as an extra
timer in the kitchen that will beep when the set ti me has run out. The minute
timer can be used alone or during any of the other oven functions. When
the minute timer is in use with any other mode, the minute timer will be
shown in the display. To view other functions,
push the function
pad for
that mode.
To Change the Minute Timer while it is in use:
While the timer is active and shows in the display, push and hold the UP or
DOWN ARROW to increase or decrease the time.
To Cancel the Minute
Timer before
the set time has run out:
Push TIMER ON/OFF.

Advertisement

Table of Contents
loading

Table of Contents