Control Pad Functions - Frigidaire GEF365CHSA Owner's Manual

Control Pad
Functions
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For
satisfactory useof your oven, become familiar with the variousfu nctions of the
oven as described below.
CANCEL PAD_ Used to
cancel any function
previously entered
except the time of day
and
CANCEL to stop
cooking.
BAKE PAD--
Used to enter
the normal
baking mode
temperature.
VARI BROIL
PAD-- Used
to select the
variable broil
function.
CLEAN PAD--
Used to select
the self-
cleaning
cycle.
UP and DOWN ARROW PADS-- Used along with the
function pads to select oven temperature, cooking
time, stop time (when programming an automatic stop
time), time of day, clean time and minute timer.
OVEN, PRE-HEAT& LOCK LIGHTS--The
•OVEN" light will glow each time the
oven element turns on to maintain the
set oven temperature. The "PRE-HEA1P'
light will glow when the oven isfirst set
to operate, or if the desired temperature
is reset higher than the actual oven
temperature. The "LOCK• light will flash
until the door locks when the self-clean
cycle is in use. It glows constantly after
the door locks.
TIMER ON/OFF
PAD_ Used to set
or cancel the
minute timer. The
minute timer does
not start or stop
cooking.
CLOCKPAD--- Usedto
set the time of day.
FEATURE
INDICATOR
light to show
which feature is in
use.
TIME PAD--
Used to enter the
length ofthe baking
time.
STOPTIME PAD-- Used
to set the desired stop
time for baking. Can be
used with BAKETIME to
program a delayed bake
cycle.
The oven can be programmed to:
• Bake normally
• Time bake
• Vari Broil
• Self-clean
For a silent control panel:
When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controls can be programmed
for silent operation. Pushand hold STOP TIME. After 7 seconds, the control will beep once. Thiswill block the controls
from sounding when a pad is pushed. To return the sound, push and hold STOP TIME again for 7 secondsuntil 1 beep
is heard.
Note: The control will return to the audible mode after a power outage.
Temperature conversion:
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be
programmed for any temperature from 170°F to 550°F (65°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. PushVARI BROIL. " " appears in the display.
2. Push and hold the UP ARROW until "HI' appears in the display.
3. Push and hold VARI BROIL until °F or °C appears in the display.
4. Push the UP or DOWN ARROW to change °F to °C or °C to °F.
5. Push any function pad to return to normal operating mode.
5