Advertisement
Setting Oven Controls
06®
o0e
• DoorLocked
s
• • • Self-Cleaning
Oven • . •
Note: The oven function will not work if the time of day clock is not set.
To Set or Change the Temperature
for Normal Baking
The oven can be programmed to bake at any temperature from 170°F to 550°F (77°C to 287°C).
Note: The oven control has a built-in safety feature that will shut off the
oven if the control is left on for more than 11 hours 59 minutes•
To Set the Controls for Normal Baking:
1.
Push BAKE pad."-
"appears in the display•
2.
WithinSseconds,pushtheUPorDOWNARROWpad.
Thedisplaywillshow"350°F(177°C)."ByholdingtheUPorDOWN
ARROW pad, the temperature can then be adjusted in 5°F (1 °C) increments•
3.
As soon as the UP or DOWN ARROW pad is released, the oven will begin heating to the selected temperature• When the
oven temperature reaches the desired baking temperature, the control will beep 3 times and the Preheat light will turn off.
4.
To cancel the baking function, push the CLEAR OFF pad.
To Change the Oven Temperature after Baking has started:
1.
If you are using the minute timer, push the BAKE pad and make sure the bake temperature is displayed•
2.
Push the UP or DOWN ARROW pad to increase or decrease the set temperature•
To Set Control for Continuous
Bake or 12 Hour Energy Saving:
The oven control has a built-in 12 Hour Energy Saving feature that will shut off the oven if the control is left on for more than 11
hours and 59 minutes• The oven can be programmed to override this feature for continuous baking•
To set control for continuous baking:
1.
Push TIMER ON/OFF pad, "0:00" will appear in the display.
2.
Push and hold TIMER ON/OFF pad down for 5 seconds until tone is heard, "----
hr" will appear in display for continuous
cooking. The current time of day will return to the display.
3.
To cancel the Continuous Bake Function, push TIMER ON/OFF pad and hold for 5 seconds until tone is heard. "12hr" will
appear in display indicating that the control has returned to the 12 Hour Energy Saving feature.
To Set Control
for Oven Lockout:
The control can be programmed to lock the oven door and inactivate the oven controls•
To Set Control for Oven Lockout feature:
1.
Push the CLEAR OFF pad and hold for 3 seconds. "Loc" will appear in display, the "Door Locked" indicator light will flash
and the motor driven door lock will begin to close automatically. DO NOT open oven door while the indicator light is flashing.
Allow about 15 seconds for the oven door to lock. Once the oven door is locked, the current time of day will appear in the
display.
2.
T_cance_the__ck_utfeature_pushcLEAR_FFpadandh__df_r3sec_nds_Thec_ntr__wi__un__ckthe_vend__randresume
normal operation.
Note: If any control pad is pressed while the Oven Door/Control Lockout mode, "Loc" will appear in the display until
the control pad is released.
Advertisement
